Please Wait...



Pepwave MAX Transit Pro E Router With 2 x Cat 12 LTE Advanced Pro Modems + PrimeCare

Not yet Shipping

Item Number: 11296
Model: MAX-TST-PROE-LTEA-R-T-PRM

Contact Me When the Pepwave MAX Transit Pro E is Available!

The Pepwave MAX Transit Pro E is on an extended backorder at this time. Sign up here to be notified when it is available again or contact us today to discuss alternative options like the MAX-HD2-DOM-M-LTEA-W depending on your needs.
Email Address: *
Name: *
Phone:
Quantity Needed
Comments:
 
 


This router includes PrimeCare for 1 year. PrimeCare includes InControl, warranty with standard RMA, FusionHub license, and SpeedFusion bonding and WAN smoothing and can be renewed for $199/year after the first year. If PrimeCare is not renewed, SpeedFusion features are disabled (basic functionality of the router will remain).

The Pepwave MAX Transit ProE, you'll be able to experience modern WiFi, throughput, and SpeedFusion speeds thanks to WiFi 5! With a compact form factor, Simultaneous Dual-Band (2.4GHz and 5GHz) Wi-Fi 5, and 2 Embedded LTEA-Pro Cellular Modems with redundant SIM slots, The MAX Transit ProE is ready to deliver, fast and reliable connectivity.

Peplink’s PrimeCare support is included for one year. This subscription provides you with access to SpeedFusion license upgrades, SpeedFusion’s Bonding, WAN Smoothing, and Hot Failover, as well as InControl SD-WAN cloud-based centralized management options, warranty support, and more.

5Gstore is a Peplink Certified PartnerRouter Features:

  • Internet Connections Supported: 2x Embedded LTEA-Pro Cellular Modems with Redundant SIM Slots  
  • Networks Supported for Embedded Modem: 4G LTE: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B26, B29, B30, B32, B41, B42, B43, B46, B48, B66;  HSPA+: B1, B2, B4, B5, B6, B8, B9, B19
  • WiFi Standard: Dual-Band (2.4GHz / 5GHz) Wi-Fi 5, 2X2 MIMO
  • WiFi Range: 250-300' through walls, much greater unobstructed (variable depending on interference from other electronics and physical interference such as walls and ceilings)
  • Ethernet ports:1 GbE WAN + 3 GbE LAN
  • Power Supply: AC Adapter included
  • Size: 6.3" x 3.8" x 1.3"
  • Bonding: SpeedFusion Bonding included (must maintain active PrimeCare subscription)

Package Contents

    • 1x Transit Pro E
    • 12V 2A 4 Pin Power Supply (ACW-632)
    • 4x 4G LTE Antennas (ACW-234)
    • 1x GPS Active Antenna (ACW-232)
    • 2x Wi-Fi Antennas (ACW-341)
    • 1 Pair of Mounting Brackets (ACW-724)
    • 6pin Terminal Block Connector
*Compatibility with all WiFi networks cannot be guaranteed. Networks requiring authentication on a "splash page" (e.g. Starbucks WiFi) in particular can be hit or miss. Also note that certain features available for other WAN connections may not be available via WAW, such as MAC Address Clone or IP Passthrough - refer to the full product manual if you plan to use WAW for more advanced routing.

Dual Embedded Cellular Modems
The MAX Transit ProE has up to two cellular modems and two redundant SIM slots, allowing you to use up to four different cellular providers for bandwidth bonding, data overage protection, or eliminating blind spots.

Simultaneous Dual-Band Wi-Fi
Reduce Wi-Fi congestion and interference. Simultaneous dual-band Wi-Fi gives you two independent networks that also work together, maximizing the throughput.

Install it Anywhere
With DIN-rail mounts and mounting ears that can be installed from many angles, the MAX Transit is ready to fit into just about any space you have available.

Specifications:

  • WAN Interface
    • 1x 10/100/1000M Ethernet (can be configured as a 4th LAN if desired)
    • 2 x Embedded LTEA-Pro Cellular Modems with Redundant SIM Slots
    • Downlink/Uplink Datarate: 600Mbps/150Mbps
  • LAN Interface
    • 3x 10/100/1000M Ethernet (WAN can be configured as a 4th LAN if desired)
  • WiFi Interface
    • Simultaneous Dual-Band (2.4GHz / 5GHz) Wi-Fi 5, 2X2 MIMO
  • Speedfusion Features (active PrimeCare subscription required):
    • Hot Failover
    • WAN Smoothing
    • Bandwidth Bonding
  • Router Throughput
    • 400Mbps
  • SpeedFusion Throughput:
    • No encryption: 100 Mbps
    • 256-bit AES: 60 Mbps
  • Recommended Users
    • 25-150
  • Cellular and GPS Antenna Connector
    • 4x SMA Cellular Connectors
    • 1x SMA GPS Antenna Connector
    • 2x RP-SMA Wi-Fi Antenna Connectors
  • Power Input
    • Power Port: 12V – 56V DC
    • AC Adapter: AC Input 100V–240V / DC Output 12V
    • Terminal Block: 12V – 56V DC
  • Power Output
    • Power over Ethernet 802.3at
    • PoE output requires a minimum of 48V power input via the terminal block or a 54V PSU with 4 Pin Power Supply.
  • Power Consumption
    • 7W (nominal), 18W (max.)
  • Dimensions
    • 6.3 x 3.8 x 1.3 inches
    • 160 x 97 x 33.5 mm
  • Weight
    • 1.3 pound
    • 590 grams
  • Enclosure
    • Indoor Metal
  • Operating Temperature
    • -40° – 149°F
    • -40° – 65°C
  • Humidity
    • 15% – 95% (non-condensing)

Filter Reviews
   Last 2 Weeks (0)   
    88% (21)
    8% (2)
    0% (0)
    4% (1)
    0% (0)
 
  Show Brief Review
  Show 5Gstore Comments
 Last 6 Months (2) 
All Reviews (24)

Page 1 of 3 123

Only customers who bought this item from 5Gstore can write a review - these are all verified 5Gstore purchases

Date Added: 06/21/2023 by Lorna C. (Apex, NC)
Works great

Date Added: 04/18/2023 by Buyer K. (Mountain View, CA)
The pricing is not as good as before due to the standard discount formula. There should be a method to work with good and repeat customers for better pricing.

Date Added: 04/07/2022 by Ashley D. (CHARLOTTE, NC)
This router is everything I needed and more! Every day I’m more impressed by its capabilities. I also highly appreciate the 5G technical support staff since they have helped me get it set up and understand how it works! I love full time in a RV travel trailer and it is working fantastic for me working remotely. Definitely recommend and highly suggest buying from 5G for their awesome technical support!

Date Added: 12/30/2021 by Joe A. (Laurel, IN)
Save your money and buy and older version! When working with multiple bands this device is slower than a Pepwave MAX BR1 Mini and is twice as expensive! I have two Pepwave MAX BR1 Mini and I love them. So I thought when I needed a third I'd go for a newer. faster model. Come to find out it was only twice as expensive and at times slower. I have worked with 5g (great) and Peplink (not so great) support for months. Peplink blames the Verizon towers for the slowness but my old BR1 Mini's, at the same location, are faster so it can NOT be the towers. The problem (IMO) is with how the Transit combines the cell bands. If I limit the Transit to one, low frequency band, it works just as good as the BR1 Mini. When other higher frequency bands are added, after time, the upload speed slows to a crawl (one MBPS). If I disable the high frequency bands it is faster. Not as fast as after a fresh reboot with all bands activated, but as fast as the BR1 Mini. Again Peplink blames the carrier but IMO no matter how slow the high frequency bands are, when enabled, they should add to the speed and NOT slow the device down. Apparently their code for "multiplexing" the bands does not work.

I gave this a 2 star because it works, and is as goods as a BR1 Mini, jus 2x the cost.

Date Added: 10/04/2021 by Philip K. (Gilroy, CA)
Very easy to set up. Put 2 SIMs in place and was up and running in less than 5 minutes. Lots more to play around with and configure (like why it picks AT&T SIM B instead of Verizon SIM A when Both SIMs are selected) but that's the fun with a product like this.

5Gstore Comments:
If the router is choosing SIM B, that would indicate that SIM A is not able to connect. Please double check that service is active with Verizon, signal is available, any static IP is configured (if necessary), etc. If the SIM will still not connect, please contact our tech support team at 833-547-8673 and we'll be happy to help!

Date Added: 08/27/2021 by Darren B. (South Jordan, UT)
This router has been perfect for our customer needs. Very happy with not only the product, but the service we get from 5G store.

Date Added: 08/24/2021 by Jamison. (San Jose, CA)
Works as expected.

Date Added: 07/27/2021 by DONNY T. (Milford, VA)
Works great and 5g store customer service has been great

Date Added: 06/01/2021 by Allan T. (Friday Harbor, WA)
We bought this for our boat in the San Juan Islands. It works great, last weekend at one of the outer islands we were getting 100mb down and 30 up when most of the other boats around us were barely getting enough connectivity to text.

Date Added: 04/30/2021 by Steve P. (Whitefish, MT)
I've purchased from 5G Store twice, they have excellent service, and if you need something they actually answer the phone and are happy to help you! Shipping was crazy fast, it actually came 3 days earlier than was estimated! Very happy with 5G Store.

Page 1 of 3 123

If you purchased this item, Login to write a review.
Q & A
Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 5Gstore will answer it!
 

Click here to submit a new question


InControl2 Software Appliance Setup Guide Download installation guide/manual
Peplink FusionHub Installation Guide Download installation guide/manual
Peplink InControl2 User Guide v1 Download installation guide/manual

Purchasing this product gets you access to the following exclusive 5Gstore resources:
RoHS Directive 2011/65/EU 06/23/2023
Radio Equipment Directive 2014/53/EU 06/23/2023
Radio Equipment Directive REACH 06/23/2023
Peplink InControl2 - How to Remove Devices 07/26/2022
TAA Compliant Peplink
Port Forwarding - Troubleshooting Checklist 12/15/2021
Peplink IC2 WAN Performance Analysis Tool - Usage 11/12/2021
Peplink IC2 WAN Performance Analysis Tool 11/12/2021
Peplink InControl 2 Setup Guide 10/07/2021
PepWave Wireless Mesh Setup 04/08/2021
SpeedFusion Cloud Setup 10/07/2021
5GStore_Sonicwall_Peplink IPsecVPNsetup 03/12/2021
Peplink Modem Manufactures
SMTP Gmail Setup Pepwave 02/26/2021
SpeedFusion Cloud Setup Video
Peplink/ Pepwave - Isolate Printer from Internet 12/28/2020
Using SpeedFusion/ PepVPN with Multiple Tunnels 12/24/2020
PepVPN/ SpeedFusion Setup via Web Admin 12/23/2020
Peplink - How to Test Your SpeedFusion Connection 11/20/2020
Peplink Firmware 8.1 Local API Documentation 11/20/2020
Peplink PPTP & L2TP VPN (updated for 8.x) 11/19/2020
Peplink - QoS tip sheet 11/19/2020
Peplink FusionHub Setup via AWS 11/17/2020
Adding a user to an InControl 2 Organization 11/05/2020
Email Notification Peplink Gmail Tip Sheet 09/14/2020
Peplink - Using SSH 09/10/2020
FIPS 140-2 Validation for Peplink Pepwave 03/18/2020
Peplink/ Pepwave - VoIP Tip Sheet 01/24/2020
How to Locate Your Local IP Address 08/10/2015
Peplink/ Pepwave Enterprise Port Forward Tip Sheet 02/07/2019
Peplink/ Pepwave - Applying a License Key 10/17/2018
Peplink/ Pepwave - Health Check Settings 10/25/2017
Troubleshooting Ethernet Modems 06/07/2017
Peplink & Pepwave DNS Forwarding and DNS Proxy 02/13/2017
InControl2 - Availability Schedule for WiFi APs 11/02/2016
InControl2 - Creating/ Editing VLAN Settings 11/02/2016
InControl2 - Creating Device Tags 11/02/2016
InControl2 - Adding Additional User Logins 10/25/2016
Peplink VLAN and Port Based VLAN Support 06/29/2016
Comcast Business Class Router - IP Passthrough 05/02/2016
Peplink International Data Roaming Tip Sheet 04/29/2016
Remote Play PS4 04/22/2016
How to Enable Find My Peplink 03/09/2016
Peplink Firmware 6.3 higher- IP Address Change 10/09/2015
Pepwave/Peplink Wake on LAN Tip Sheet 11/27/2015
Pepwave/Peplink Domain Block Tip Sheet 11/20/2015
Chain 2 Routers Tip Sheet 09/29/2015
Router Utility App 09/11/2015
Changing Your Router's IP Address 09/10/2015
Dynamic DNS Tip Sheet 09/03/2015
IP Camera Router Tip Sheet 09/02/2015
Peplink/Pepwave Link to Current Firmware
PAP Radius Server Pepwave/Peplink Tip Sheet 08/12/2015
Pepwave/Peplink – Watchdog Activation Tip Sheet 07/23/2015
Peplink Facebook Social WiFi Setup 07/07/2015
Peplink/Pepwave Speedfusion Incontrol2 Issue 07/01/2015
Incontrol2 Adding Groups Tip Sheet 07/02/2015
Incontrol2 Firmware Upgrade Tip Sheet 07/02/2015
Pepwave SOHO Android USB Tethering 06/29/2015
How to Find Your Device(s)' Local IP address 06/02/2015
Peplink Supported 3G/4G LTE Networks
CLI SSH Command Reference 02/26/2015
MAC Address Cloning 02/26/2015
Testing Ports with Telnet Tip Sheet 02/24/2015
Using a Router to Block Access to your Home Modem 02/24/2015
InControl2 Guide 02/24/2015
Setting Up Apple Airport w Cradlepoint or Peplink 02/16/2015
A Custom Appearance For Your SSID
Windows/Mac Static IP Address Tip Sheet 11/24/2014
Peplink Pepwave Deny LAN Access 09/13/2013
Pepwave – Remote Admin Tip Sheet 06/25/2013
Pepwave - Bandwidth Usage 05/30/2013
Pepwave Family Friendly Tip Sheet 05/24/2013
Creating a Static Route - CP/Peplink/Pepwave 09/08/2014


If you already purchased this item from 5Gstore, Log In to the support portal to access these downloads.