Mobile Mark’s CVL 2400/5500 covert antenna covers WiFi 6 from 2.4 - 2.5 & 4.9 - 6.0 GHz. This antenna is ideal for WiFi modems with high data throughput. The antenna has excellent performance characteristics and performs well at all points in the operating frequencies bands. This CVL antenna offers 2 dBi gain with a VSWR rating of under 2:1 across the bandwidth.
This antenna has a very slim profile: the depth of the antenna is less than .08” (2 cm). The overall dimensions are also small. The CVL-2400/5500 is approximately 2.41” long, including the mounting holes, and 0.65” wide (61.1 cm x 16.5 cm). It features an over-molded plastic radome made from UV stable polyamide that allows some flexing of the antenna case. This flexibility, along with the antenna’s slim profile, allows it to fit into a wide variety of mounting locations. It is especially suited for small spaces in a machine, small NEMA enclosures, or inside a vehicle. If mounted inside, the enclosure must be non-metallic; built out of a material such as plastic or fiberglass that will not block the transmission signal.
The antenna comes with two built-in grommet holes for an easy and secure installation. If the mounting holes are not needed and space is an issue, the mounting holes can be cut off. If the mounting holes are not used the antenna can be mounted with double sided tape. This antenna is completely encased in plastic and meets the water & dust ingress rating of IP69. It also passes the following Military and Industrial standards for Shock & Vibration: IEEE-147, EN61373, TIA329.2-C and MIL-810G.
Key Features
- 2.4 to 2.5 GHz and 4.9 to 6.0 GHz frequencies
- 3 dBi (peak gain) without a ground plane
- Compact, overmolded black radome
- 10 watts maximum power
- 8' RG-174 cable with SMA plug (male) connector
- Operating temperature from -40 to 80°C
| Technology |
| Category |
Antenna |
| Wireless |
| Single / SISO Antennas |
WiFi |
| Pattern |
Omnidirectional |
| Wi-Fi Frequencies |
2.4 - 2.5 GHz, 4.9 - 6 GHz |
| VSWR |
<2:1 |
| Gain |
3 dBi (peak) |
| Polarization |
Vertical |
| Impedance |
50 ohms (nominal) |
| Mechanical |
| Cabling |
8' RG-174 |
| Connector Type |
SMA plug (male) |
| Enclosure |
UV Stable Polyamide |
| Dimensions |
2.41 x 0.65" (61.1 x 16.5 cm) |
| Mounting |
2 built-in grommet holes |
| Shock / Vibration |
IEEE1478, EN61373, MIL-810G, TIA 329.1-C |
| Ratings |
| Operating Temperature |
-40 to 80°C |
| Warranty |
2 years |
