Please Wait...



weBoost Drive Reach Flex Fleet Repeater Kit - 478061 - 478061
  • weBoost Drive Reach Flex Fleet Repeater Kit - 478061 - Amplifier
  • weBoost Drive Reach Flex Fleet Repeater Kit - 478061 - Contents
  • weBoost Drive Reach Flex Fleet Repeater Kit - 478061 - NMO Antenna
  • weBoost Drive Reach Flex Fleet Repeater Kit - 478061 - In-Vehicle Antenna

weBoost Drive Reach Flex Fleet Repeater Kit - 478061

Call for Availability

Item Number: 11225
Model: 478061
Quantity:

Price:

$549.99

This is a special-order item that requires additional lead time. Contact us before ordering if you need a more exact ETA.

weBoost’s most powerful, 5G-compatible, in-vehicle cell signal amplifier kit is now available with more flexible installation options. The Drive Reach Flex Fleet is designed for use in any fleet vehicle — service vans, work trucks, electrical vehicles, and more. Using high-performance NMO antenna with magnetic mount and providing two power supply options, this kit can be professionally installed without permanently altering a vehicle. With up to 50 dB max gain, Drive Reach Flex instantly provides your team with improved cell signal for seamless tracking, reliable communication, and faster data speeds on any network and any cellular-connected device.

Features:

  • Designed for use in any fleet — service vans, emergency vehicles, work trucks, electric vehicles, and more
  • Boosts signal strength for cellular-based fleet tracking devices allowing fleet managers to better track vehicles, even in weak signal areas.
  • Works with ALL cellular devices in the vehicle on ALL carriers simultaneously.
  • Increases cellular range, provides fastest available data speeds, and improves call quality

*Many factors will influence the actual coverage area you will see from a repeater, including layout/floorplan, construction, and original un-amplified signal strength. Depending on your situation, you may see more or less coverage than the estimates listed here. It is not possible to guarantee coverage area.




Installation notes:

  • In order for your system to function properly, you must maintain adequate separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will shut down). This amplifier requires approximately 5' of separation between the outside and inside antennas. Separation can be horizontal or vertical.
  • The inside antenna should be mounted within a couple of feet of where boosted signal is needed. In a typical vehicle, the best place to mount the inside antenna is shoulder height on the side of the drivers seat. Remember, the closer your phone is to the interior antenna, the better the performance.
  • Do not mount the interior antenna within 4" of metal.
  • You CANNOT use a traditional adapter cable that plugs directly into an antenna port on a phone/modem with this amplifier - doing so will damage your device! If you want a direct connect amplifier, see our direct connect options

Package Includes: 

  • Amplifier
  • 314405 NMO antenna
  • 90mm adhesive disk for Aluminum vehicles (990065)
  • 314419 Slim low profile ("candy bar") antenna with 10' cable
  • Hardwire Power Supply & In-line Fuse Holder (950079)
  • Power Supply (850029)
  • Mounting Plate for Aluminum Vehicle
  • SMA to SMB Adapter
  • O-ring sealant

Specifications:

  • Part Number: 478061
  • Frequency Range:
    • BAND 12/17: 700 MHz
    • BAND 13: 700 MHz
    • BAND 5: 850 MHz
    • BAND 4: 1700/2100 MHz
    • BAND 25/2: 1900 MHz
  • Max Gain: 50 dB
  • Power: 12V / 1.8A
  • Impedance: 50ohms
  • Connectors: SMB
  • Dimensions: 6 x 4.5 x 1.5 in (amplifier)
  • Weight: 1.80 lb (amplifier)

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.


There are currently no product reviews.

If you purchased this item, Login to write a review.
Q & A
Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 5Gstore will answer it!
 

Click here to submit a new question


support