Price:
$333.40
MIMO antenna contains five separate antennas, all in one compact antenna housing: four Wi-Fi antennas and one cellular antenna. The LTM502 differs from the LTM501 in that the broadband LTE/Cellular element covers all LTE frequencies worldwide, from 694-3700 MHz. Both WiFi and LTE MIMO (multiple-input-multiple-output) modems offer greater speed and capacity than earlier generations of modems. To ensure optimum performance, the systems need multiple antennas on both the transmission and receive ends.
Frequency & Gain (peak)
Cable 1 - 4 (WiFi) 2.4-2.5 & 4.9-6.0 GHz, 5 dBi Cable 5 (GPS) 1575.42 +/- 2 MHz, 26 dB, 5 dBi
VSWR
2:1 VSWR over Range
Impedance
50 Ohm Nominal
Maximum Power
10 Watts
Noise Figure
2.0 dB max, 1.7 dB typical
Current
20 mA max, 10 mA typical
Case size
Surface Mount 5.50” Dia. x 2.38” High (140mm x 60.4mm)
Radome Material
ASA UV-Stable Plastic
Operating Temperature
-40° to +80° C
Connectors
RP-SMA (WiF) and SMA (GPS)
Cable
Cable 1-4 Separate RF-195,15 ft (4.5m) Cable 5 (GPS) RG-174, 15 ft (4.5 meters)
LTM Mounting
7/8” (22mm) Dia. Feed through 3/4”(19mm)Long Thread for up to 1/2” (13mm) thick surface
Shock & Vibration
IEEE1478, EN61373, MIL-810G, TIA 329.2-C
Water Ingress
IP67
