Power and GPIO Cable for 4-Pin Routers - 3 Meters 5GStore is your source for Cradlepoint power supplies, adapters, Cradlepoint DC power cables, accessories and additional parts for your Cradlepoint endpoints, including GPIO cables for the Cradlepoint COR Series routers. This Cradlepoint Power and GPIO four-pin router cable splits the four-pin power connector to four bare leads, two power and two GPIO (which includes both an input pin and an output pin) and is used for custom wiring solutions. This cable measures three meters long and allows you to enable versatile and changeable functions to tailor your Cradlepoint routers to your specific needs. This Cradlepoint Power/GPIO cable (Model 170585-001) is compatible with Cradlepoint COR Series routers, which includes R1900, IBR350, IBR600, IBR600B, IBR600C, IBR1700, IBR900, IBR1100 and Option Cloudgate. Have questions about this Cradlepoint GPIO cable? Contact 5GStore for more information about how this cable can be used on your Cradlepoint router to modify your existing setup or to implement custom wiring scenarios. Features: Input Pin: The Input Pin can be used to read a value — either high or low — from an external device and either display that value on the administration page (as the Current Value) or cause the router to reset. Select one of the following options from the dropdown menu: Default/Ignored: In this mode the input pin is not used. Input Sensing: In this mode the logic state (high or low) is automatically sensed by the router and is readable as the Current Value. Router Reset: In this mode an external device can reset the router by holding the input low for 10-seconds. Output Pin – The Output Pin can be used to allow an external device to read either whether the router is running or whether the modem is connected. Select one of the following options from the dropdown menu: Default/Low: In this mode the output pin is not used and is at 0V (ground potential). Set High/Router Running: In these modes the output pin is logic low while the router is booting and transitions to logic high when the router is fully running. If the router is reset, the output returns to low until the router has fully rebooted. Modem Connected: In this mode the output pin is logic low until the modem has connected to a tower. If the connection drops, this output is set low until the connection is restored. 170585-001 170585-001

CradlePoint

Cable & Accessory > Power Supply

810007800547

$ $14.49 810007800547 https://5gstore.com/product/9067_power_and_gpio_cable_for_4-pin_routers_3_meters.html

5.00 8

5GStore is your source for Cradlepoint power supplies, adapters, Cradlepoint DC power cables, accessories and additional parts for your Cradlepoint endpoints, including GPIO cables for the Cradlepoint COR Series routers. This Cradlepoint Power and GPIO four-pin router cable splits the four-pin power connector to four bare leads, two power and two GPIO (which includes both an input pin and an output pin) and is used for custom wiring solutions. This cable measures three meters long and allows you to enable versatile and changeable functions to tailor your Cradlepoint routers to your specific needs.

This Cradlepoint Power/GPIO cable (Model 170585-001) is compatible with Cradlepoint COR Series routers, which includes R1900, IBR350, IBR600, IBR600B, IBR600C, IBR1700, IBR900, IBR1100 and Option Cloudgate. Have questions about this Cradlepoint GPIO cable? Contact 5GStore for more information about how this cable can be used on your Cradlepoint router to modify your existing setup or to implement custom wiring scenarios.

Features:

Input Pin: The Input Pin can be used to read a value — either high or low — from an external device and either display that value on the administration page (as the Current Value) or cause the router to reset. Select one of the following options from the dropdown menu:

Default/Ignored: In this mode the input pin is not used.
Input Sensing: In this mode the logic state (high or low) is automatically sensed by the router and is readable as the Current Value.
Router Reset: In this mode an external device can reset the router by holding the input low for 10-seconds.

Output Pin – The Output Pin can be used to allow an external device to read either whether the router is running or whether the modem is connected. Select one of the following options from the dropdown menu:

Default/Low: In this mode the output pin is not used and is at 0V (ground potential).
Set High/Router Running: In these modes the output pin is logic low while the router is booting and transitions to logic high when the router is fully running. If the router is reset, the output returns to low until the router has fully rebooted.
Modem Connected: In this mode the output pin is logic low until the modem has connected to a tower. If the connection drops, this output is set low until the connection is restored.

GPIO connector

Latest Blog Posts About This Product

Latest YouTube Videos About This Product

Compatible with routers that use 4-pin power inputs.

This cable is 3 meters long.

Filter Reviews

Last 2 Weeks (0)

				100% (8)
				0% (0)
				0% (0)
				0% (0)
				0% (0)

		Show Brief Review
		Show 5Gstore Comments

Last 6 Months (0)

All Reviews (8)

Only customers who bought this item from 5Gstore can write a review - these are all verified 5Gstore purchases

Date Added: 10/26/2020 by dan s. (camarillo, CA)

exactly what i was looking for and shipped quickly

Date Added: 04/27/2020 by Heather A. (Turnersville, NJ)

Quick delivery

Date Added: 04/06/2020 by Angela M. (Steamboat Springs, CO)

We use these in all our cars.

Date Added: 10/04/2019 by Rick L. (Lawrenceburg, KY)

Great Buy. Thanks!

Date Added: 08/19/2019 by Gianina L. (Los Angeles, CA)

5Gstore Comments:
This review is for a previous version of this product - comments about specific features, problems, or functionality may not apply to the current model.

Date Added: 02/01/2019 by Steve R. (Waterloo, ON)

5Gstore Comments:
This review is for a previous version of this product - comments about specific features, problems, or functionality may not apply to the current model.

Date Added: 10/26/2017 by William. (Round Hill, VA)

Haven't hooked it up yet, but the product is exactly as described and what I ordered. No issues at all with my purchase experience.

5Gstore Comments:
This review is for a previous version of this product - comments about specific features, problems, or functionality may not apply to the current model.

Date Added: 06/27/2016 by CPoint. (Camarillo, CA)

Works great

5Gstore Comments:
This review is for a previous version of this product - comments about specific features, problems, or functionality may not apply to the current model.

If you purchased this item, Login to write a review.

Q & A

Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 5Gstore will answer it!

Click here to submit a new question

Sort By:

Will Cradlepoint cable 170585-001 allow me to wire my Cradlepoint router into a DC power source?

This power cable will allow for hardwire power to DC power source for the IBR model routers and used for custom wiring solutions.

Purchasing this product gets you access to the following exclusive 5Gstore resources:

	Cradlepoint - How to Set up a Cellular Connection	07/05/2024
	Cradlepoint OpenVPN	12/01/2020
	Cradlepoint SSH	10/23/2020
	Cradlepoint Data Usage Failover	10/23/2020
	Active Ping CradlePoint 2018	01/15/2018
	MAC Address Cloning	02/26/2015

If you already purchased this item from 5Gstore, Log In to the support portal to access these downloads.