Please Wait...



Warning While Supplies Last!
weBoost Home Room Booster Kit - 472120
  • weBoost Home Room Booster Kit - Installation
  • weBoost Home Room Booster Kit - Contents
  • weBoost Home Room Booster Kit - Amplifier
  • weBoost Home Room Booster Kit - Outside antenna
  • weBoost Home Room Booster Kit - Inside antenna
  • weBoost Home Room Booster Kit - Packaging

weBoost Home Room Booster Kit

In Stock

Item Number: 9803
Model: 472120
Quantity:
Have a large deployment?
Request a Quote
Login for Special Pricing

Price:

$399.99

A surge protector goes in between your outside antenna and the amplifier and protects your amplifier if lightning strikes your antenna. It's not required but is recommended for users in areas where lightning strikes frequently.
Add Lightning Protection (optional) - details

The weBoost Home Room ensures you get better voice and data with fewer dropped calls, improved voice quality, faster uploads/downloads and longer battery life. This premier home signal booster can increase cell signals up to 32x while enhancing cellular signals for buildings up to 1,500 sq. ft. This makes it an ideal solution for apartments, condos, small homes and small offices.

Multiple users and devices can utilize the boosted signal from this amplifier kit. weBoost’s Home Room is compatible with all U.S. networks including Verizon, AT&T,, T-Mobile, U.S. Cellular, and more. As a 2G/3G/4G/LTE amplifier, it enhances all aspects of the cellular spectrum from texting to video streaming.

Amplifier Features:

  • Coverage area*: up to 1,500 square feet
  • All-in-One Kit? YES
  • Compatibility: This amplifier supports 700mhz/800mhz/1700mhz/1900mhz/2100mhz networks (which includes most 2G, 3G, and 4G providers in the US). Supported carriers/networks include:
    • Verizon 2G/3G/4G/AWS
    • Sprint 2G/3G/4G LTE (gain is minimal for Sprint 4G LTE, and only on the 1900mhz band. This amplifier does not support Sprint's 2500mhz LTE band)
    • AT&T 2G/3G/4G/LTE
    • US Cellular 2G/3G/4G
    • T-Mobile 2G/3G/4G
    • MetroPCS 2G/3G/4G
    • For other carriers, confirm which frequency your provider is using and make sure this amplifier supports it before purchasing! Contact us if you need any assistance

If there is even a faint signal, the weBoost Home Room can capture and boost it. Each device comes with everything you need for a complete installation including an indoor antenna, outdoor antenna, power supply, 30’ cable and trained support staff available to assist via phone with the DIY installation. The outdoor directional antenna must be aimed at the nearest cell tower for best performance, which may take a little trial and error. You will also need at least 30 feet of separation between the two antennas to prevent feedback. Click on the Details tab for more installation notes.

All weBoost signal boosters come with a two-year warranty. If you’re looking for a weBoost Home 4G review to help make your decision, check the Customer Reviews tab. Each review is from a verified customer who purchased their booster from 5Gstore. As a stocking dealer, we have fast shipping and fair pricing to go with our knowledgeable service from broadband experts.


IMPORTANT SIGNAL INFORMATION: If you're purchasing an amplifier for use at one specific location, we strongly recommend doing a site survey first to determine whether the amplifier will help you and to give you an idea of what kind of results you can expect from it.

If your signal is extremely poor (-108db or worse), an amplifier may not be effective - there must be some usable signal available for the amplifier to boost. Conversely, if the signal is too STRONG at your location (-50db or better), the amplifier may shut down to avoid interference with the tower.

How it works: The outside antenna picks up the cellular signal and sends it through the first cable to the amplifier. The signal is then boosted and sent through the second cable to the inside antenna, which rebroadcasts the boosted signal. All of your modems/phones within range of the inside antenna can benefit from the boosted signal wirelessly.


*Many factors will influence the actual coverage area you will see from a repeater, including layout/floorplan, construction, and original un-amplified signal strength. Depending on your situation, you may see more or less coverage than the estimates listed here. It is not possible to guarantee coverage area.




Installation diagram:

not to scale. representative graphic only (appearance of actual components may vary)

Installation notes:

  • In order for your system to function properly, you must maintain adequate separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will shut down). This amplifier requires approximately 30' of separation between the outside and inside antennas. Separation can be horizontal or vertical.
  • If you cannot achieve adequate separation to eliminate oscillation, you can turn down the gain on the amplifier, but that will result in a smaller coverage area from the amplifier.
  • The outdoor/window antenna must be aimed at the cell tower - if it is not aimed properly, it will not be effective. Line of sight is not required, but it does need to be aimed towards the tower.
  • Make sure the interior desktop antenna is aimed AWAY from the outside antenna.

Features & Benefits:

  • Boosts cellular signals for a desktop workspace area at home or small office.
  • Coverage area up to 1,500 sq. ft.
  • For multiple devices and users.
  • Works on ALL cellular devices with ALL carriers simultaneously. Enhances talk, text, and high-speed internet.

Package Includes:

  • Amplifier
  • Outdoor directional antenna
  • Dual-band desktop antenna (5' cable attached)
  • 2 x 30’ RG6 cable
  • Flat Window Cable
  • Mounting hardware
  • Power Supply
  • Installation guide

Specifications:

  • Part Number: 472120
  • Frequency:
    • BAND 12/17: 700MHz
    • BAND 13: 700MHz
    • BAND 5: 850 MHz
    • BAND 4: 1700/2100MHz
    • BAND 2: 1900 MHz
  • Gain: 60 dB
  • Impedance: 75ohms
  • Power Requirements: 110-240 V AC, 50-60 Hz, 8 W
  • Connectors: SMA-Female (inside connector)/F-Female (outside connector)
  • Dimensions: 6.5 x 1.25 x 4.25 in (amplifier)
  • Weight: 0.45 lbs / 0.20 kg (amplifier)

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

Filter Reviews
   Last 2 Weeks (0)   
    73% (8)
    9% (1)
    0% (0)
    9% (1)
    9% (1)
 
  Show Brief Review
  Show 5Gstore Comments
 Last 6 Months (0) 
All Reviews (11)

Page 1 of 2 12

Only customers who bought this item from 5Gstore can write a review - these are all verified 5Gstore purchases

Date Added: 04/13/2020 by NNTU. (WINDOW ROCK, AZ)
Works great with VZW LTE.

Date Added: 08/01/2017 by Richard L. (Weyers Cave, VA)
Details:

I live in the Shenandoah Valley just outside of Grottoes VA. My internet is via Sprint using a (portable) pocketWiFi device that "beams" my internet from a tower located far away. I went with Sprint since they have an unlimited data plan (which I formerly had with Ntelos, which was bought by Sprint). I originally had only 1 bar on my Wifi device, but after chatting with folks at the 3G store, they recommended this product.

I was skeptical, but took the leap. WOW! It worked great. You get a booster, an outdoor antenna, and an indoor antenna. The outdoor antenna collects the signal, which is sent to the booster and then to the indoor antenna; the boosted signal is then sent to my Wifi device, which sends the signal to the rest of my house. I have consistently 5 bars. I am really impressed.

A few things to note: you will need two people to set this up; one person to manipulate the outdoor antenna (that is hooked up to the booster + indoor antenna) to find the sweet spot for the signal, and another person inside to observe the Wifi device to see the difference in signal strength. If you have a portable Wifi device that runs on batteries (as mine does--it also has an AC adapter), then just take the device outside/on your roof and look for the signal change. Once you've found the high-strength area, that's where to start with placing your antenna.

Across the board, this was a very successful purchase. The folks at 3G store were great, and they even followed up with me to make sure I was satisfied. Great product, great business.

Date Added: 01/10/2017 by george . (Whitesboro, TX)
Its perfect. Waaaay beyond my expectations!!! This is the one you want for a country house with a metal roof.

Date Added: 12/23/2016 by steve h. (dike, TX)
My former internet service was expensive and poor, so I wanted to switch to a new one based on a hotspot. However, my reception here is really bad so I needed a new amplifier. This seems to have done the trick very nicely!

Date Added: 10/13/2016 by Robin F. (Staunton, VA)
Product works fantastic, it double the signal, it accommodates multiple users, I can now use the phones without dropping the calls

Date Added: 10/13/2016 by Mitch R. (Gerald, MO)
Buy with caution! If you don't have a bar or two on your phone, this will not help. You must have a signal in order for it to be able to work. I am in a fringe area, mine works depending on the weather and cloud cover. I am planning to add a yagi antenna with hopes that it will help enough to make this work most of the time. The unit and antenna connections get very hot if the signal is weak as it has to work very hard to amplify a weak signal. This helps a lot inside the house and is a very good appliance. Just be aware of its limitations before making a purchase.3G store is very helpful and it is easy to get help.

Date Added: 09/30/2016 by Eric I. (Ponder, TX)
Thank you to 5gstore for calling me to check up on how the product was working for me, that is great customer service. The device works great, I went from a -116 dBm to a -88 dBm.

Date Added: 07/21/2016 by joe d. (north collins, NY)
Product did not work in my area.

5Gstore Comments:
We're sorry it's not working out for you! We don't see any calls or emails from you - please contact us so we can assist you.

Date Added: 07/05/2016 by Robert L. (Cascade, ID)
Not only was the box open, which I expected, but the system was also "open" and will not close properly.

Date Added: 04/13/2016 by james k. (yucca valley, CA)
The "open box" really wasn't opened, it appears to be more of an overstock item. Everything was still sealed in the manufacturers packaging. Unit works great and now I have phone service in my steel building workshop. Thanks 5Gstore.

Page 1 of 2 12

If you purchased this item, Login to write a review.
Q & A
Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 5Gstore will answer it!
 

Click here to submit a new question

Sort By:

Will this booster work with LTE devices using IOT like the Nordic 9160 LTE processor with VZE service? I want to make sure all the IOT frequencies and bands are repeated.

This amplifier supports 700mhz/800mhz/1700mhz/1900mhz/2100mhz networks. Any device utilizing these frequencies should be compatible.


support