Long Range WiFi Bridge System to Extend Internet Access
Multiple buildings may present unique challenges when securing a reliable internet connection. With today’s point-to-point wireless bridges and long-range Wi-Fi antennas, you can quickly and easily install the system necessary to extend your network connectivity. With our Long-Range Wi-Fi Bridge Kit System, you’ll get an all-in-one kit for quick and easy extended range Wi-Fi — even up to one mile away (or more with direct line of sight). Guest houses, work sheds, nearby office buildings and more can all benefit from our affordable wireless bridge systems from 5GStore.
Our long-range Wi-Fi bridge system to extend internet access comes with two antennas and two power of Ethernet (PoE) injectors. This point-to-point wireless kit can be mounted on walls or on rooftops to minimize obstacles, such as trees, buildings and other structures. Just install an antenna to each building: this pre-configured long-range Wi-Fi antenna will automatically connect and begin transmitting data to phones, computers and more. The 5GHz Wi-Fi setup will support speeds up to 150Mbps. Have questions? Don’t hesitate to contact 5GStore! As experts in Wi-Fi products and services, we’re here to help you find the perfect long-range Wi-Fi antenna to meet your needs.
Check out the installation manual (PDF) for more setup information.
*In order for the Bridge Kit to function at the longest range possible with the highest data speeds, you will need line of sight between the two antennas without any interference from trees, buildings, hills, etc. The Bridge Kit can function at distances well over 1 mile, but requires more precise aiming and clear line of sight between the two antennas. At shorter distances, the Bridge Kit will still function with minor obstructions between the two antennas (like trees), but line of sight is always preferable for maximum performance. Included in the kit:
2 x 5.0GHz MIMO antenna kits (pre-configured)
2 x PoE injectors
2 x 17.5" x 1.5" poles with 5" x 7.5" mounting plates (mounts to any flat horizontal or vertical surface; appropriate anchors are necessary and not included) for outdoor mounting
2 x pole clamps (secures the antenna to the pole; can be used with the included poles OR with virtually any similarly-sized pole if you already have one installed)
2 x window/wall mounts and mounting bases for indoor mounting
2 x 3" pieces of silicone sealing tape
Instruction manual
NOTE: The bridge kit requires two ethernet cables on each side of the setup (one to go from the POE injector to the antenna and a second to connect the POE injector to your router/network equipment); a total of FOUR ethernet cables will be needed and are NOT included. Any standard cat5 ethernet cables up to 300' can be used, but if you plan to mount the antennas outside, weatherproof ethernet cables are STRONGLY advised.
WiFi antenna specs:
Networking interface: (2) 10/100 Ethernet Ports
Bandwidth: 150Mbps full duplex
Dimensions: 11.57 x 1.22 x 3.15"
Weight: 0.88 lbs
Power Supply (PoE): 24V, 0.5A
Max Power Consumption: 8 W
Gain: 16dBi
Polarization: Dual Linear
Enclosure Characteristics: Outdoor UV Stabilized Plastic
Mounting: Pole Mounting Kit Included
Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Operating Temperature: -30 to 75° C / -22 to 167° F
Operating Humidity: 5 to 95% Condensing
Shock and Vibration: ETSI300-019-1.4
Operating Frequency: 5725 - 5850MHz
5
5
38
I have only had this product in production for about 3 weeks. The product shipped with two mounting systems which was great. It was pretty much plug and play. I am not bridging a large distance but the speed is across the bridge is excellent. The only issue I have is that the antennas are mounted up high and the location of status lights are at the top of the antenna so I cannot just glance up and see the current status. Also they are almost impossible to see in direct light. It would be good if the lights were located on the bottom or if you could access a web interface to view the status. Maybe they do have a web interface and I am not aware of it. So far I am very happy.
Adam C.
5
5
I have only had this product in production for about 3 weeks. The product shipped with two mounting systems which was great. It was pretty much plug and play. I am not bridging a large distance but the speed is across the bridge is excellent. The only issue I have is that the antennas are mounted up high and the location of status lights are at the top of the antenna so I cannot just glance up and see the current status. Also they are almost impossible to see in direct light. It would be good if the lights were located on the bottom or if you could access a web interface to view the status. Maybe they do have a web interface and I am not aware of it. So far I am very happy.
Date Added: 08/31/2017 by Adam C. (Brookline, NH)
If you purchased this item, Login to write a review.