Cel-Fi QUATRA 1000 Network Unit (NU) for AT&T

Cel-Fi QUATRA 1000 Network Unit (NU) for AT&T The Cel-Fi QUATRA Network Unit (NU) is the hub of the system. The scalable design works with one to four Coverage Units to provide up to 50,000 sq ft. of coverage. Provides Donor Signal to Cel-Fi QUATRA System Provides Power to Coverage Units (Up to Four) Connects to WAVE Cloud Platform for Remote Monitoring and Management 590NQ34GWUS2ATUS1BK1 590NQ34GWUS2ATUS1BK1

CEL-FI

Amplifier > Wireless Repeater

https://5gstore.com/product/7490_cel-fi_quatra-network-unit-att

The Cel-Fi QUATRA Network Unit (NU) is the hub of the system. The scalable design works with one to four Coverage Units to provide up to 50,000 sq ft. of coverage.

Provides Donor Signal to Cel-Fi QUATRA System
Provides Power to Coverage Units (Up to Four)
Connects to WAVE Cloud Platform for Remote Monitoring and Management

QUATRA1000_datasheet(7490) .pdf

QUATRA1000_datasheet(7500).pdf

quatra4000_datasheet(9832).pdf

Specifications

Power (Network Unit)
- 54 VDC @ 2.22 Amp via external supply (51.3 to 56.7 VDC tolerance).
- External supply: 100 to 240 VAC, 47 – 63Hz.
- Power consumption less than 120W max.
- Network Unit powers Coverage Units over Cat 5e (PoE).
Environmental
- Operating temperature: 0° to 40°C
- Storage temperature: -25° to 60°C
- Convection Cooling.
- Relative humidity: 0% to 95%, noncondensing
- RoHS II 2011/65/EU.
- IP20 Rated.
- Installation
Mounting hardware included.
- NU may be wall mounted (solid or hollow).
- CUs may be wall or ceiling mounted.
- 1NUsupports1-4CUs.
- Mounting brackets allow for mounting flexibility.
- iBwave supported.
Radio Performance
- Supports four bands (2/4/5/12):
  - Band 2:
    - DL: 1930-1990MHz, UL: 1850-1910MHz
    - Up to 20MHz contiguous boost BW, HSPA
  - Band 4:
    - DL: 2110-2155MHz, UL: 1710-1755MHz
    - Up to 20MHz contiguous boost BW, HSPA or LTE MIMO
  - Band 5:
    - DL: 869-894MHz, UL: 824-849MHz
    - Up to 15MHz contiguous boost BW, HSPA
  - Band 12:
    - DL: 729-746MHz, UL: 699-716MHz
    - Up to 10MHz contiguous boost BW, LTE MIMO
- Total boost all-channel bandwidth 75MHz (2x2 MIMO uses double bandwidth per channel V-H polarization).
- DL Maximum NU in-band donor level -40dBm.
- DL Maximum NU survival donor level 24dBm.
- UL Maximum CU donor level -20dBm.
- Internal MIMO antennas 0-2dBi (band dependent).
- Maximum UL power 22dBm EIRP bands 2, 4.
- Maximum UL power 20dBm EIRP band 5, 12.
- Maximum DL power 10dBm per 5 MHz all bands per antenna.
- LTE 5/10/15/20MHz and WCDMA 3.84/5MHz bandwidths.
Connections
- 4x CU RJ45 Proprietary Gigabit link.
  - 100 meter max cable length per CU (200 meter with optional QUATRA Range Extender).
  - PoE
  - Cat 5e or better.
- RJ45 LAN management port (10/100 Fast Ethernet).
- RJ45 LAN management output port (10/100 Fast Ethernet).
- 2x MIMO External RF Input (QMA Female 50 ohm).
Compliance
- 3GPP TS 25.143 Rel.10
- 3GPP TS 36.143 Rel.10
- FCC Part 15, 20, 22, 24, 27
- UL STD 62368-1
- Bluetooth BQB
Management
- QUATRA Management Tool (QMT).
- Supports WAVE cloud portal.

There are currently no product reviews.

If you purchased this item, Login to write a review.

Q & A

Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 5Gstore will answer it!

Cel-Fi QUATRA 1000 Network Unit (NU) for AT&T

Click here to submit a new question