Peplink PDX Rugged Hard-case Router 2x 5G / Cat 20 LTE

This is a special-order item that requires additional lead time. Contact us before ordering if you need a more exact ETA.

Peplink PDX Rugged Hard-case Router 2x 5G / Cat 20 LTE This router features two embedded modems and you will need SIM cards with active service from a compatible provider to use them. The PDX has Nano-SIM (4FF) The PDX is a portable, rapid deployment router designed to provide stable and secure connection from remote locations. It comes with a dual-cellular router, both cellular and GPS antennas, and room for optional batteries ; all seamlessly integrated into a rugged enclosure capable of withstanding the rigors of the outdoors. Deployable within minutes, the PDX offers Public Safety personnel the ability to immediately establish stable and secure communications to headquarters from any emergency site. Equipped with built-in interfaces for WAN, LAN, and Wi-Fi, as well as antennas for cellular and GPS, the PDX can be used in remote and volatile situations. The PDX provides you with rapid deployment connectivity from the moment boots hit the ground. Combining the bandwidth of up to 2x Embedded Gigabit 5G/ LCat-20 LTE connections, the PDX provides fast and reliable connectivity regardless of site location. Quickly and safely transmit project data, emails, plans, and blueprints between personnel, sites, and headquarters. Keep your event connected and your cameras streaming. The PDX supports 2 x Gigabit 5G /cat-20 LTE cellular connections to keep your event connected no matter where it is held. With 7x 802.3af PoE ports & 1x USB Power Output you can simplify your cabling when connecting and powering your devices. The PDX comes with a 802.11ac Wi-Fi which supports a customizable captive portal with advertisements. Features: Internet Connections Supported Embedded 2x 5G/Cat-20 LTE, 2 Wired WAN, WiFi as WAN* Networks Supported for Embedded Modems: 5G (NSA) Sub 6Ghz: n1, n2, n3, n5, n28, n41, n66, n71, n77, n78, n79 LTE Bands B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B34, B38, B39, B40, B41, B42, B46 (LAA), B48, B66, B71 Certifications - FCC, CE, IC - 7.7G Vibration resistance MIL-STD-810H 514.8E-1 Cat24, IP55/65^, Verizon@, FirstNet WiFi Standard 802.11ac/a/b/g/n WiFi Range: 300-400' through walls, much greater unobstructed (variable depending on interference from other electronics and physical interference such as walls and ceilings) Ethernet ports 7 GbE LAN + 2 GbE WAN (can be configured as LAN) Power AC/DC power supplies included. Operate via optional batteries (sold separately) for up to 9 hours Antennas 8x Internal Cellular Antennas 4x Internal Wi-Fi Antennas 1x Internal GPS Antenna Bonding SpeedFusion VPN Bonding . NOTE: Many factors influence the real-world throughput you'll see from bonded connections, including latency, connection type, connection speeds, traffic type, and reliability on both sides of the SpeedFusion tunnel. Cellular users should note that bonded cellular connections suffer from "flow control" of TCP traffic at the carrier level, and 5Gstore cannot guarantee that bonding multiple cellular connections will result in faster speeds (however, the other benefits of SpeedFusion remain, such as unbreakable VPN, session persistence, and 100% up-time as long as you have 1 healthy WAN). PDX-5GH-T PDX-5GH-T

Peplink

Router

$ $14,999.00 https://5gstore.com/product/8928_peplink_pdx_rugged_hard-case_router_2x_5g_cat_20_lte.html

This router features two embedded modems and you will need SIM cards with active service from a compatible provider to use them. The PDX has Nano-SIM (4FF)

The PDX is a portable, rapid deployment router designed to provide stable and secure connection from remote locations. It comes with a dual-cellular router, both cellular and GPS antennas, and room for optional batteries; all seamlessly integrated into a rugged enclosure capable of withstanding the rigors of the outdoors.

Deployable within minutes, the PDX offers Public Safety personnel the ability to immediately establish stable and secure communications to headquarters from any emergency site. Equipped with built-in interfaces for WAN, LAN, and Wi-Fi, as well as antennas for cellular and GPS, the PDX can be used in remote and volatile situations.

The PDX provides you with rapid deployment connectivity from the moment boots hit the ground. Combining the bandwidth of up to 2x Embedded Gigabit 5G/ LCat-20 LTE connections, the PDX provides fast and reliable connectivity regardless of site location. Quickly and safely transmit project data, emails, plans, and blueprints between personnel, sites, and headquarters.

Keep your event connected and your cameras streaming. The PDX supports 2 x Gigabit 5G /cat-20 LTE cellular connections to keep your event connected no matter where it is held. With 7x 802.3af PoE ports & 1x USB Power Output you can simplify your cabling when connecting and powering your devices. The PDX comes with a 802.11ac Wi-Fi which supports a customizable captive portal with advertisements.

Features:

Internet Connections Supported	Embedded 2x 5G/Cat-20 LTE, 2 Wired WAN, WiFi as WAN*
Networks Supported for Embedded Modems:	5G (NSA) Sub 6Ghz: n1, n2, n3, n5, n28, n41, n66, n71, n77, n78, n79
LTE Bands	B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B34, B38, B39, B40, B41, B42, B46 (LAA), B48, B66, B71
Certifications	- FCC, CE, IC - 7.7G Vibration resistance MIL-STD-810H 514.8E-1 Cat24, IP55/65^, Verizon@, FirstNet
WiFi Standard	802.11ac/a/b/g/n
WiFi Range:	300-400' through walls, much greater unobstructed (variable depending on interference from other electronics and physical interference such as walls and ceilings)
Ethernet ports	7 GbE LAN + 2 GbE WAN (can be configured as LAN)
Power	AC/DC power supplies included. Operate via optional batteries (sold separately) for up to 9 hours
Antennas	8x Internal Cellular Antennas 4x Internal Wi-Fi Antennas 1x Internal GPS Antenna
Bonding	SpeedFusion VPN Bonding. NOTE: Many factors influence the real-world throughput you'll see from bonded connections, including latency, connection type, connection speeds, traffic type, and reliability on both sides of the SpeedFusion tunnel. Cellular users should note that bonded cellular connections suffer from "flow control" of TCP traffic at the carrier level, and 5Gstore cannot guarantee that bonding multiple cellular connections will result in faster speeds (however, the other benefits of SpeedFusion remain, such as unbreakable VPN, session persistence, and 100% up-time as long as you have 1 healthy WAN).

*Compatibility with all WiFi networks cannot be guaranteed. Networks requiring authentication on a "splash page" (e.g. Starbucks WiFi) in particular can be hit or miss. Also note that certain features available for other WAN connections may not be available via WAW, such as MAC Address Clone or IP Passthrough - refer to the full product manual if you plan to use WAW for more advanced routing.

Latest Blog Posts About This Product

Latest YouTube Videos About This Product

pepwave_pdx_datasheet(8928).pdf

Pepwave MAX PDX User Manual (8928).pdf

Specifications:

Country of Origin	Taiwan
No. of Cellular Connectors	8
No. of WiFi Connectors	4
No. of GPS Connectors	1
Cellular Connector	SMA Female
WiFi Connector	RP-SMA Female
GPS Connector	SMA Female
No. of LAN Ports	7
No. of WAN Ports	2
No. of Fiber (SFP) Ports	0
No. of Serial Ports	0
No. of Embedded Modems	2
Ports Configurable as LAN/WAN	Yes
USB Port	WAN
WAN Throughput Speed	2.5 Gbps
SIM Card Size	4FF
Length (in)	15.8
Width (in)	19.8
Height (in)	7.4
Weight (lb)	34.61
Minimum Temperature (F)	-40
Maximum Temperature (F)	113
Antennas Included	Yes
Modem Expansion Slot	Yes
Modem Replaceable	No
FIPS Certified	No
WiFi Support	WiFi 5
Cloud Management Included	Yes
Power Input	DC: 12V – 56V, AC: 100V – 240V
Bluetooth	No
Bonding Support	Yes
IP Passthrough	No

There are currently no product reviews.

If you purchased this item, Login to write a review.

Q & A

Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 5Gstore will answer it!

Click here to submit a new question

	Peplink API Doc for Firmware 8.1.1	Download installation guide/manual
	InControl2 Software Appliance Setup Guide	Download installation guide/manual
	Peplink FusionHub Installation Guide	Download installation guide/manual
	Peplink InControl2 User Guide v1	Download installation guide/manual

Purchasing this product gets you access to the following exclusive 5Gstore resources:

	Peplink - Creating a Second SSID and Password	08/27/2024
	Peplink - How to Change the LAN IP Address	08/09/2024
	Peplink - Apply an APN	08/09/2024
	Peplink - What MTU Size Should You Use?	08/09/2024
	Peplink - Hardware Factory Reset Instructions	07/26/2024
	Peplink - Bonding with SpeedFusion Connect	07/26/2024
	Peplink Firmware Update	07/19/2024
	Peplink InControl2 - How to add 5Gstore support	04/26/2024
	RoHS Directive 2011/65/EU	06/23/2023
	Radio Equipment Directive 2014/53/EU	06/23/2023
	Radio Equipment Directive REACH	06/23/2023
	Peplink InControl2 - How to Remove Devices	07/26/2022
	TAA Compliant Peplink
	Port Forwarding - Troubleshooting Checklist	12/15/2021
	Peplink IC2 WAN Performance Analysis Tool - Usage	11/12/2021
	Peplink IC2 WAN Performance Analysis Tool	11/12/2021
	Peplink InControl 2 Setup Guide	10/07/2021
	PepWave Wireless Mesh Setup	04/08/2021
	SpeedFusion Cloud Setup	10/07/2021
	5GStore_Sonicwall_Peplink IPsecVPNsetup	03/12/2021
	Peplink Modem Manufactures
	SMTP Gmail Setup Pepwave	02/26/2021
	SpeedFusion Cloud Setup Video
	Peplink/ Pepwave - Isolate Printer from Internet	12/28/2020
	Using SpeedFusion/ PepVPN with Multiple Tunnels	12/24/2020
	PepVPN/ SpeedFusion Setup via Web Admin	12/23/2020
	Peplink - How to Test Your SpeedFusion Connection	11/20/2020
	Peplink Firmware 8.1 Local API Documentation	11/20/2020
	Peplink PPTP & L2TP VPN (updated for 8.x)	11/19/2020
	Peplink - QoS tip sheet	11/19/2020
	Peplink FusionHub Setup via AWS	11/17/2020
	Adding a user to an InControl 2 Organization	11/05/2020
	Email Notification Peplink Gmail Tip Sheet	09/14/2020
	Peplink - Using SSH	09/10/2020
	FIPS 140-2 Validation for Peplink Pepwave	03/18/2020
	Peplink/ Pepwave - VoIP Tip Sheet	01/24/2020
	How to Locate Your Local IP Address	08/10/2015
	Peplink/ Pepwave Enterprise Port Forward Tip Sheet	02/07/2019
	Peplink/ Pepwave - Applying a License Key	10/17/2018
	Peplink/ Pepwave - Health Check Settings	10/25/2017
	Troubleshooting Ethernet Modems	06/07/2017
	Peplink & Pepwave DNS Forwarding and DNS Proxy	02/13/2017
	InControl2 - Availability Schedule for WiFi APs	11/02/2016
	InControl2 - Creating/ Editing VLAN Settings	11/02/2016
	InControl2 - Creating Device Tags	11/02/2016
	InControl2 - Adding Additional User Logins	10/25/2016
	Peplink VLAN and Port Based VLAN Support	06/29/2016
	Peplink International Data Roaming Tip Sheet	04/29/2016
	Remote Play PS4	04/22/2016
	How to Enable Find My Peplink	03/09/2016
	Peplink Firmware 6.3 higher- IP Address Change	10/09/2015
	Pepwave/Peplink Wake on LAN Tip Sheet	11/27/2015
	Pepwave/Peplink Domain Block Tip Sheet	11/20/2015
	Chain 2 Routers Tip Sheet	09/29/2015
	Router Utility App	09/11/2015
	Dynamic DNS Tip Sheet	09/03/2015
	Peplink/Pepwave Link to Current Firmware
	PAP Radius Server Pepwave/Peplink Tip Sheet	08/12/2015
	Pepwave/Peplink � Watchdog Activation Tip Sheet	07/23/2015
	Peplink Facebook Social WiFi Setup	07/07/2015
	Peplink/Pepwave Speedfusion Incontrol2 Issue	07/01/2015
	Incontrol2 Adding Groups Tip Sheet	07/02/2015
	Pepwave SOHO Android USB Tethering	06/29/2015
	How to Find Your Device(s)' Local IP address	06/02/2015
	Peplink Supported 3G/4G LTE Networks
	CLI SSH Command Reference	02/26/2015
	MAC Address Cloning	02/26/2015
	Testing Ports with Telnet Tip Sheet	02/24/2015
	Using a Router to Block Access to your Home Modem	02/24/2015
	A Custom Appearance For Your SSID
	Windows/Mac Static IP Address Tip Sheet	11/24/2014
	Peplink Pepwave Deny LAN Access	09/13/2013
	Pepwave � Remote Admin Tip Sheet	06/25/2013
	Pepwave - Bandwidth Usage	05/30/2013
	Pepwave Family Friendly Tip Sheet	05/24/2013

If you already purchased this item from 5Gstore, Log In to the support portal to access these downloads.

Recommended accessories for your Peplink PDX Rugged Hard-case Router 2x 5G / Cat 20 LTE

$699

$664.05

Add To Cart

Pepwave Mobility 82G (8xCell,2x WiFi,1xGPS) - White - SMA - ...

OR