This is a special-order item that requires additional lead time. Contact us before ordering if you need a more exact ETA.
Features:
- Stylish, MultiRoom-exclusive Inside Antenna
- Powerful, precision-mount Outside Antenna
- Enhances cell coverage for up to 3 large rooms*
- Tool-free installation. No need to drill holes
- Compatibility: This amplifier supports 700mhz/800mhz/1700mhz/1900mhz/2100mhz networks (which includes most 2G, 3G, and 4G providers in the US). Supported carriers/networks include:
- Verizon 2G/3G/4G/AWS
- Sprint 2G/3G/4G LTE - only on the 1900mhz band (band 25). This amplifier does not support Sprint's 2500mhz LTE band
- AT&T 2G/3G/4G/LTE
- US Cellular 2G/3G/4G
- T-Mobile 2G/3G/4G
- MetroPCS 2G/3G/4G
- For other carriers, confirm which frequency your provider is using and make sure this amplifier supports it before purchasing! Contact us if you need any assistance.
The weBoost Home MultiRoom cell signal booster boosts networks speeds across all available signal bands (including Band 25 for enhanced Sprint support) for up to three large rooms.
The Home MultiRoom also features an exclusive, Inside Antenna—featuring a built-in kickstand and stylish fabric cover while also providing best-in-class performance. Wall-mount installation is effortless with the included 3M® CommandTM strips. The proprietary Outside Antenna offers a tool-free, finger-tightened precision mount. Users will experience faster data speeds, better voice quality, fewer dropped calls, and superior streaming capability. Home MultiRoom works with all US carriers—including Verizon, AT&T, T-Mobile, Sprint, and more.
Installation notes:
- In order for your system to function properly, you must maintain adequate separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will shut down). This amplifier requires approximately 40' of separation between the outside and inside antennas. Separation can be horizontal or vertical.
- If you cannot achieve adequate separation to eliminate oscillation, the gain on the amplifier will automatically adjust to accomodate, but that will result in a smaller coverage area from the amplifier.
- The Yagi antenna must be aimed directly at the cell tower - if it is not aimed properly or if there are too many obstructions between it and the cell tower, it will not be effective.
- The interior antenna should be at least 10' away from the amplifier.
- Make sure the panel antenna is aimed AWAY from the outside antenna.
Includes:
- Home MultiRoom Amplifier
- 314445 Yagi Outside Antenna
- 314440 Fabric Wall Mount Panel Antenna
- 2 x 15' RG6 Cable
- 30' RG6 cable
- Flat Window Cable
- 850018 AC power supply
- Outside Antenna Mounting Bracket
- Wall Mount Brackets w/ Command Strips
- Cable Mounting Clips (qty 15)
- Instruction manual
Specifications:
- Part Number: 470144
- Frequency:
- BAND 12/17: 700 MHz
- BAND 13: 700 MHz
- BAND 5: 850 MHz
- BAND 4: 1700/2100 MHz
- BAND 25/2: 1900 MHz
- Max Gain: 65 dB
- Impedance: 75ohms
- Power Requirements: 110-240 V AC, 50-60 Hz, 8 W
- Connectors: F-Female
- Dimensions: 6.5 x 6 x 2.625 in (amplifier)
- Weight: 1.9 lbs (amplifier)
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.
IMPORTANT SIGNAL INFORMATION: If you're purchasing an amplifier for use at one specific location, we strongly recommend doing a site survey first to determine whether the amplifier will help you and to give you an idea of what kind of results you can expect from it.
If your signal is extremely poor (-108db or worse), an amplifier may not be effective - there must be some usable signal available for the amplifier to boost. Conversely, if the signal is too STRONG at your location (-50db or better), the amplifier may shut down to avoid interference with the tower.
*Many factors will influence the actual coverage area you will see from a repeater, including layout/floorplan, construction, and original un-amplified signal strength. Depending on your situation, you may see more or less coverage than the estimates listed here. It is not possible to guarantee coverage area.
