Mobile Mark’s CVL 2400/5500 Series Covert Antenna covers WiFi networks on the 2.4-2.5 GHz and 4.9-6.0 GHz bands. This antenna and can be mounted either outside or inside a stand- alone device, a NEMA box or a vehicle. The antenna has excellent performance characteristics and performs well at all points in the operating frequencies bands. This CVL antenna offers 3 dBi gain with a VSWR rating of under 2:1 across the bandwidth.
This CVL also has a very slim profile: the depth of the anten- na is less than .08” (2 cm). The overall dimensions are also small. The antenna is approximately 2.41” long, including the mounting holes, and 0.65” wide (61.1 cm x 16.5 cm). The antenna features an over-molded plastic radome made from UV stable polyamide that allows some flexing of the antenna case. This flexibility, along with the antenna’s slim profile, allows it to fit into a wide variety of mounting locations.
If mounted inside, the enclosure must be non-metallic; in other words the enclosure must be built out of a material such as plastic or fiberglass that will not block the transmission signal. The antenna comes with two built-in grommet holes for an easy and secure installation. If the mounting holes are not needed and space is an issue, the mounting holes can be cut off. If the mounting holes are not used the antenna can be mounted with double sided tape.
This CVL antenna is completely encased in plastic and meets the water & dust ingress rating of IP69. In addition, it passes the following Military and Industrial standards for Shock & Vibration: IEEE-147, EN61373, TIA329.2-C and MIL-810G.
Features:
- Dual band WiFi capability
- IP69 rating
- Extremely slim profile for tight installations
- Built-in mounting holes for easy installation
- Preattached 8' cable with RP-SMA Male connector
