Please Wait...
Log In
5Gstore is open and fully operational! Shipping/receiving is uninterrupted at our warehouse, and our sales and support staff are working at home. We are ready to help you any way we can. Same-day shipping available (cutoff 3pm CST)!

Wilson IoT 5-Band Direct Connect Amplifier for M2M w/ 4" Mag Mount Antenna & AC Power - 460119

In Stock

Item Number: 6524
Model: 460119



The Signal 4G includes a 4" magnetic mount antenna. If you prefer, you can replace that antenna with a different one - for example, if you want to mount a taller antenna to the exterior of your home or RV, or if you don't want to have to worry about having a magnetic surface to mount the included antenna. The alternative antennas you can select from this menu include any necessary cables and/or adapters you'll need to connect it to the amplifier.
Add a different antenna (optional) - details
Users of USB modems, hotspots, and embedded modems that use a connector type OTHER than SMA/Male will need an adapter cable or connector to connect the amplifier to your device AND an SMA to FME adapter (if your device has an SMA/Female connector, you will NOT need any adapters). If you already own the necessary adapters OR if your device has an SMA/Female antenna connector, you can select the "I already have an adapter" option from the bottom of the list.
Select Your Adapter Cable or Connector (required) - details
This amplifier uses a cable with an SMA/Male connector. If you will be using the amplifier with a traditional adapter cable, you MUST add the SMA to FME adapter. If you're using it with a device with an SMA/Female connector (like the Max BR1, IBR600, and most other embedded routers), you do NOT need to add this.
Add SMA to FME Adapter (required for non-SMA users!) - details

This is the latest hardware revision that includes passive RF bypass! 

When you’re on the road for business or pleasure, or installing an LTE setup in a non-optimal signal environment, you don’t want to spend half your time searching for a better cellular signal. The Wilson 460119 Direct Connect Amplifier amplifies weak 4G/LTE signals to improve data performance for a single device. This M2M amplifier uses the same technology as weBoost signal boosters to provide bi-directional amplified signals for enterprise or consumer cellular modems. The five-band Wilson Signal 4G connects directly to the antenna port on any data modem to enhance the broadband signal.

With the Wilson 460119 amplifier, you can get a better signal on Verizon, AT&T, MetroPCS and most other major U.S. cellular providers and networks. It can be configured to almost any M2M setup and has automatic power control based on the actual signal strength. RF bypass failover means you will still get the benefits of the mag mount antenna (or a different antenna if you prefer) if the amplifier has a loss of power. Use this M2M direct connect amplifier to extend your mobile connection range with a stronger and more reliable signal.

Amplifier Features:

  • All-in-One Kit? NO - a 4" mag mount antenna is included, but many users opt to purchase a different antenna instead; users of non-SMA devices will need an adapter to connect the amp to their device (sold separately), see above
  • Compatibility: This amplifier supports 700mhz/800mhz/1700mhz/1900mhz/2100mhz networks (which includes most 2G, 3G, and 4G providers in the US). Supported carriers/networks include:
    • Verizon 2G/3G/4G/AWS
    • Sprint 2G/3G/4G LTE - 4G LTE will only be improved where Sprint is using the 1900mhz band. This amplifier does NOT support Sprint's 2500mhz LTE band
    • AT&T 2G/3G/4G/LTE
    • US Cellular 2G/3G/4G
    • T-Mobile 2G/3G/4G
    • MetroPCS 2G/3G/4G
    • For other carriers, confirm which frequency your provider is using and make sure this amplifier supports it before purchasing! Contact us if you need any assistance.

IMPORTANT SIGNAL INFORMATION: If you're purchasing an amplifier for use at one specific location, we strongly recommend doing a site survey first to determine whether the amplifier will help you and to give you an idea of what kind of results you can expect from it.


  • Direct connect amplifier - connects directly to data modem
  • Installs in minutes
  • Boosts signal for all U.S. cell carriers
  • Configurable to fit virtually any M2M (machine to machine) install
  • Auto-power control ensures maximum output
  • All components needed for installation in one package
  • FCC Certified
  • Now with passive RF bypass failover. If the Signal 4G loses power, the amplifier is "bypassed" so that the external antenna maintains connection to the modem

User Benefits

  • Bi-directional amplified signals to and from the cell tower
  • Significantly extends connection range
  • Strong, reliable signal even in weak signal areas
  • Less resending of data due to poor connection means faster transfers

Included in box

  • Amplifier
  • 4" magnetic mount antenna (301126)
    • Other antennas can be used with the Signal 4G if you prefer. You can add a different antenna to your order from the menu beneath the "add to cart" button on the top of this page, or if you already own an antenna and you'd like to use it with the signal 4G, you'll just need an adapter to connect your cable to the amplifier (if your cable ends in FME/Female, you'll need the FME/Male to SMA/Male Connector; if your cable ends in N/Male you'll need the N/Female to SMA/Male Connector)
  • 859948 AC power supply
  • 3' RG174 SMA/male cable to connect the amplifier to your modem's SMA/female connector
  • Installation guide


  • Model/Part Number: 470119
  • Connectors: SMA Female
  • Impedance: 50ohms
  • Frequency:
    • Band 17    700 MHz
    • Band 13    700 MHz
    • Band 5    850 MHz
    • Band 4    1700/2100 MHz
    • Band 25/2    1900 MHz
  • Max Gain: 15dB
  • Power Requirements: AC/DC 5V/2A
  • Dimensions: 6.2 x 3.6 x 1.3 inch / 15.7 x 9.1 x 3.3 cm
  • Weight: 1.2 lbs / 0.54 kg

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

Filter Reviews
   Last 2 Weeks (0)   
    100% (10)
    0% (0)
    0% (0)
    0% (0)
    0% (0)
  Show Brief Review
  Show 5Gstore Comments
 Last 6 Months (1) 
All Reviews (10)

Only customers who bought this item from 5Gstore can write a review - these are all verified 5Gstore purchases

Date Added: 09/03/2020 by Chris. (DALLAS, TX)
Adding these to our sites made approximately a 6 dB difference in signal

Date Added: 12/30/2019 by Steven H. (Brentwood, TN)
We were able to smooth out cellular connectivity and now have a strong stable signal through our provider where there was very weak and spotty service before.

Date Added: 09/27/2019 by JASON S. (GILLETTE, WY)
boost signal but slows the speed

Date Added: 08/15/2019 by Joel K. (Baltimore, MD)
I work remotely in the middle of nowhere land on the weekends, being able to connect to my vendors, banks, customers & remote computer servers is extremely important, without a good signal I am screwed, lost time & money. I did the site survey and the conclusion was the booster and antenna may do nothing for me. Knowing I had line of sight to the tower and the signal strength readings, I knew I could do better. I bought this unit anyway along with a Wilson directional panel antenna, the flat one. I first installed the booster with my omni antenna I already had (better than the one that comes in the kit) and there was NO change in signal strength. So I put up the Wilson flat panel antenna without the booster. Very little difference in signal strength (-87db to -85db) a disappointment. I have clear line of site to the tower so I expected more of a change. I installed the booster with the Wilson flat panel antenna and it went down to -54db. 30db improvement. Well worth what I spent. No more dropped signal. I highly recommend this unit.

Date Added: 08/01/2018 by Jeff. (Austin, TX)
Works great with Pepwave BR1 mini to boost in remote locations

Date Added: 06/18/2018 by william t. (Ossining, NY)
heavy duty

Date Added: 04/26/2018 by Larry A. (INDUSTRY, TX)
was able to get excellent signal after installing booster

Date Added: 01/02/2018 by Ed K. (Klamath Falls, OR)
Works great

Date Added: 08/10/2017 by Charles D. (Gordonsville, VA)
We are using a air card with an outside antenna. The internet connection kept dropping off because of a week signal. This amplifier has taken care of the problem 100%.

Date Added: 04/28/2016 by JEFF S. (CHANNELVIEW, TX)
The equipment I just ordered kicked butt!

We had a 4g booster and then the Cradlepoint with a Verizon aircard.

Just to many devices.

We built a 30 ft mast out of waterpipe.

Put the omni antenna on top.

Hooked up the amp and connected the AER-1600.

When I arrived it took 4 minutes just to open

After installing the above items.

.6 MBPS became 6 to 8 MBPS.

This is awesome

If you purchased this item, Login to write a review.
Q & A
Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 5Gstore will answer it!

Click here to submit a new question

Sort By:

Questions & Answers

Wilson Signal 4G Installation Manual Download installation guide/manual

Recommended accessories for your Wilson IoT 5-Band Direct Connect Amp - AC Power- 4" Antenna

Wilson Suction Cup Window Mount
Hardwire Power Harness for 6V Wilson/weBoost Amplifiers - 85 ...
6V DC Power Supply for Wilson/weBoost Amplifiers